FUTURE CARBON

MARS Wheels.001.jpeg
foto-round-logo-1-jippy.jpg
MARS Wheels.001.jpeg
foto-round-logo-1-jippy.jpg

FUTURE CARBON

from 1,480.00
VERSION:
DIAMETER:
Quantity:
Add To Cart

FUTURE CARBON 27.5" and 29"

We are exclusively using the highest grade carbon prepregs with specific properties for the requirements for our rims and adapt our production processes specifically to the demands of the material in use in order to thus be able to fully exploit the potential of the raw material. That way we are using high-grade, high-tensile fiber types with a specific resin system with long curing times and adapt our processes accordingly. Whilst a rim in mass production is hardly ever allowed more than 30 minutes, our first curing cycle accounts to a whopping 2 1/2 hours and in addition features very flat temperature and pressure gain slopes. This is in order to guarantee a resin flow as optimal as possible and to ideally net the laminate layers as well as to offer enough time to press out even the smallest gas bubble in between the laminate layers. With faster curing times however the danger of even generating additional gas bubbles in the system increases due to the fast and high rising temperature. These would not be visible with the naked eye - so do not differ in quality optically - but will yield vastly worse mechanical properties; a not be taken lightly price of a quantity driven mass production.

Formula 1 materials
As material we are using a specific resin sytem from motorsports that offers the highest heat tolerance and mechanical robustness and there predominantly is being utilized for the thermally and mechanically highly stressed brake exhausts of Formula 1 cars.

Tempering
This no enough and especially important for rim brake rims: In addition to the actual curing all our in effect already finished rim brake rims run through another heat cycle in a separate heating oven. During this so called "tempering" the rims are being gradually brought to their glass transition temperature (T_g) in order to prepare them for extreme thermal stresses, such as dragging brakes of a heavy rider in alpine territory. In this cycle the resin crystals re-orientate and this way ensure the highest possible safety.

Production time
The production of a single rim takes 7 1/2 hours in order to get the maximum out of the material and to be able to offer you the best possible quality and performance - a span of time that was unthinkable in mass production!

ONE DREAM ONE VISION!

 


TECH

FUTURE S1
Rims: FUTURE Carbon Asymmetrical
Rims material: LUNAR Carbon Fiber
Rims Width: 24mm internal
Rims Type: Carbon Clincher Tubeless Ready
Finishing: Optical Carbon UD
Spokes: Sapim CX-Ray
Nipples: Sapim Ergal Black
Front Hub: DT-Swiss 240S SP 24h
Rear Hub: DT-Swiss 240S SP 28h
Hubs: 142^12/100^15 or 148^12/110^15 Boost
Freewheel: SHIMANO/SRAM and SRAM XD
Logos: Ice White / Black Stealth
Weight: From 1290g

 

FUTURE S2
Rims: FUTURE Carbon 29"
Rims material: LUNAR Carbon Fiber
Rims Width: 25mm internal
Rims Type: Carbon Clincher Tubeless Ready
Finishing: Optical Carbon UD
Spokes: Sapim CX-Ray
Nipples: Sapim Alloy Black
Front Hub: DT-Swiss 350 SP 24h
Rear Hub: DT-Swiss 350 SP 28h
Hubs: 142^12/100^15 or 148^12/110^15 Boost
Freewheel: SHIMANO/SRAM and SRAM XD
Logos: Ice White / Black Stealth
Weight: From 1390g

 


FUTURE TEAM
Rims: FUTURE Carbon 29"
Rims material: LUNAR Carbon Fiber
Rims Width: 25mm internal
Rims Type: Carbon Clincher Tubeless Ready
Finishing: Natural Carbon UD
Spokes: Sapim CX Ray SP Black / 28H Front and Rear
Nipples: Sapim Alloy Black
Front Hub: Spaziale Innova Hub 24h
Rear Hub: Spaziale Innova Hub 28h
Hubs: 142^12/100^15 or 148^12/110^15 Boost
Freewheel: SHIMANO/SRAM and SRAM XD
Logos: Ice White / Black Stealth
Weight: From 1520g

Use: Cross Country and Marathon only
Max Rider Weight: 231lb (105kg)
WARRANTY: LIMITED LIFETIME

Superlight 29” and 27.5" Wheelset, available on request with: QR15, RS-1 or Lefty front hub and or X-12 rear hub. Freewheel SRAM or SHIMANO 10 gears, SHIMANO 11 gears or SRAM (XX1, X01, X1) XD Drive 11 gears.


Quick releases and axels are not provided with the wheelset.
Recommended max rider weight limit on 105kg / 231lb. Use: MTB Cross Country use only

PLACING YOUR ORDER, PLEASE INDICATE YOUR FREE HUB CHOICE.