Diamante is our lightest products line and probably the lightest on the market. Superlight rims, wheels sets, special parts and components. Handcrafted in Italy with the most advanced technologies, unique finishing and impressive light weight.
Nothing is saddle, we keep developing new products to push the performance a bit higher at every update.
This type of laminate can be only achieved with a totally handmade construction with a location of the layers of carbon made by hand on each seatpost. There is a different number and arrangement of layers at each point.
To choose the proper seatpost length, measure the length of your seatpost out of the frame. Measure from seatclamp to saddle rails. Then choose the appropriate size in the following table. If there are two possibilities it is recommended to take into account the variation and use of the bicycle by different riders. If you need a larger or smaller size, in case is needed, contact us for a custom seatpost up to 500 mm or even longer.
Riders weight limit: This seatpost is safe and has passed the standard ISO 4210 tests, however it is not recommended for more than 198lbs (90 kg). In the destructive tests, the handlebar has carried loads of 350 kg without breaking. We can manufacture a handlebar without rider weight limit with a weight increase of only 25 grams.
Recommended Use: MTB Cross Country and Marathon only.
Finishing: Natural Carbon UD
Bar ends: Not allowed
Diameter: 27.2 and 31.6
Length: 400mm / 350mm / 300mm / 250mm
Weight: 93g / 84g / 75g / 64g
Rider weight Limit: 198lbs (90Kg)
For a reinforced seatpost, no weight rider limit, or even exclusive optimization to further reduce weight, contact us and we will produce an exclusive handlebar for you. As it’s produced in a totally manual way, we can adapt to the needs of the users.
IMPORTANT NOTICE: The seatpost are calculated exclusively for each width, so a shorter seatpost is not a cutted seatpost. This implies a greater work of calculation and manufacture but shorter handlebars have a very low weight.